Sharp MD-DR470H Operation Manual page 56

! Beep sound
You can eliminate the confirmation sound that beeps when
you press a button.
! Auto play
You can make the unit not play automatically when you insert
a playback-only MiniDisc or an accidental erasure protected
MiniDisc.
! Auto power save
When the unit is used in a place exposed to much vibration,
sound skipping can be decreased by cancelling the auto
power save function. (Battery will drain faster.)
What is auto power save function?
During playback, maximum 40 seconds (in stereo) of
musical information is stored. Auto power save function
automatically adjusts the storage time between 5 and 40
seconds to reduce the power consumption. If this func-
tion is cancelled, the storage time cannot be adjusted.
" If this unit is used with the AC adaptor, the storage
time will be 40 seconds regardless of the settings.
" The storage time varies depending on the recording
mode.
! Digital recording level
"AUTO SAVE"
The digital recording level you set will be kept even after can-
celling recording.
"NOT SAVE"
Every time you cancel recording, the level will return to [D.L
0dB].
! Backlight on the remote control
"NORMAL"
Display Always displayed
Backlight Lit for approx. 10 seconds dur-
ing operation
"ALL TIME"
Display Always displayed
Backlight Lit for approx. 10 seconds dur-
ing operation
(Always lit if used with AC
adaptor)
"AUTO OFF"
Display Displayed for approx. 10 sec-
onds during operation
Backlight Lit for approx. 10 seconds dur-
ing operation
02/12/18 MDDR470_SEEG_E.fm
MD-DR470H
ENGLISH
E-56