Sharp MD-DR470H Operation Manual page 35

Advanced Recording (continued)
MD-DR470H
ENGLISH
! Trace-back recording
When making a microphone or radio broadcasting, etc. (ana-
logue) recording, you can trace back 5 - 30 seconds prior
and start recording.
When connected digitally, trace-back recording cannot be
operated.
1
Press the REC button.
Recording is paused.
2
Press the MENU button.
The unit enters the menu select mode.
3
Select "TRACE BACK"
pressing the or button
and press the MENU button.
4
Press the or button to
select the trace back time.
TIME 5sec Traces back 5 seconds to record.
TIME 10sec Traces back 10 seconds to record.
TIME 30sec Traces back 30 seconds to record.
OFF Cancelled.
5
Press the MENU button.
The above is displayed alternatively and trace-back re-
cording is set to standby.
E-35
6
Press the
The unit traces back the time set in step 4 and starts re-
cording.
To interrupt recording
Press the button.
When it is pressed again, the unit traces back the set time
and resumes recording.
To cancel the trace-back recording
The setting for trace-back recording remains even if
you remove the MiniDisc.
by
To cancel trace-back recording, select "OFF" in step
4.
When the unit is digitally connected, trace-back recording
cannot be set or the setting cannot be cancelled. Remove
the digital cable and retry.
About trace-back recording
Trace-back recording is a function to temporarily store
music of a selected period of time into the memory to per-
form recording. The stored memory is transferred to a
MiniDisc when the
Music starts to be stored when a period of time is selected
(in step 5).
Notes:
" When a recording level is set within the selected trace-
back time, recording will be performed at the level you
set.
" Synchronised recording cannot be performed if trace-
back recording is set.
02/12/18
button at the desired point.
button is pressed for recording.
MDDR470_SEEG_E.fm