Sharp MD-DR470H Operation Manual page 49

Editing a Recorded MiniDisc (continued)
MD-DR470H
ENGLISH
! To divide a track
You can divide a track into 2 tracks.
1
During playback, press the
where you wish to divide the track. Playback will be
paused.
2
Press the MENU button.
The unit enters the menu select mode.
3
Select "EDIT" by pressing the
or button and press the
MENU button.
4
Select "DIVIDE" by pressing the
or button and press the
MENU button.
5
Press the MENU button.
The track will be divided into two
tracks, and the unit will pause at the
beginning of the second of the two
new tracks.
When a track has a name before dividing:
The two new tracks will have the same name. However, in the
"TOC FULL" condition, the second track may not be named.
Total number of tracks that can be divided:
Each disc can hold up to 255 tracks. However, even if the
number of assigned tracks has not reached 255, it might not
be possible to make any further divisions of tracks.
E-49
! To move a track
You can move a track to the desired position.
1
button at the point
Whilst in the stop mode or pause mode, select the
track to move by pressing the
2
Press the MENU button.
The unit enters the menu select mode.
3
Select "EDIT" by pressing the
or button and press the
MENU button.
4
Select "MOVE" by pressing the
or button and press the
MENU button.
5
Select the new position for the
track by pressing the
button.
6
Press the MENU button.
The track will be moved, and the unit will be stopped or
paused at the beginning of the track.
Moving a track to another group
Group-recorded tracks can be moved within the group. To
move them to a different group, use the GROUP
CHANGE function.
02/12/18
or button.
or
MDDR470_SEEG_E.fm