Recording - Sharp MD-DR470H Operation Manual

Recording

MD-DR470H
ENGLISH
[ GROUP ] [
57
E-15
1
Press the REC button.
Recording is paused.
! Even when the power is off, you can start record-
ing by pressing the REC button.
! "DISCONNECT" will appear for 1 second if noth-
[ ]
ing is connected.
2
To perform group recording,
[ REC ]
hold down the GROUP but-
[ ]
ton for 2 seconds or more so
[ MENU ]
that "GR" is lit.
! The unit is ready to record a new group. (To select
a group, refer to page 18.)
! When group recording is not performed, hold
down the GROUP button for 2 seconds or more so
that "GR" goes out.
! Setting for group recording will not be changed un-
til a new setting is entered.
]
3
Start playback on the external equipment and ad-
just the recording level by pressing the
button (page 17).
Adjust the recording level so that the maximum
sound volume from the source makes the reading
swing somewhere between -4 dB and 0 dB.
4
Press the PAUSE button on the stereo system to
enter the playback pause mode.
Here you can search for the track to record.
02/12/18
or
MDDR470_SEEG_E.fm