Sharp MD-DR470H Operation Manual page 50

! To combine tracks
Two adjacent tracks can be combined.
1
Whilst in the stop mode, select the latter of the two
tracks to be combined by pressing the
ton.
2
Press the MENU button.
The unit enters the menu select mode.
3
Select "EDIT" by pressing the
or button and press the
MENU button.
4
Select "COMBINE" by pressing
the or button and press
the MENU button.
5
Press the MENU button.
The two tracks will be combined,
and the unit will stop at the begin-
ning of the combined track.
" A track in the pause mode can also be combined.
To combine two non-adjacent tracks:
" First, put the two tracks next to each other in the order
you want using the MOVE function. Then combine
them using the COMBINE function.
" For group-recorded tracks, only those in the same
or but-
group can be combined. To combine tracks in different
groups, move one track using the GROUP CHANGE
function before combining them.
When one or both tracks to be combined have a
name:
The first track name will be used. However, when the first
track does not have a name, the second track name will
be used.
In the following cases, tracks may not be combined.
" Tracks recorded by different inputs cannot be com-
bined.
Examples:
" Digital recorded track and analogue recorded track.
" Different recording modes (stereo recording, 2 times
long recording, 4 times long recording, monaural re-
cording).
" Tracks whose recording time is less than 12 seconds.
02/12/18 MDDR470_SEEG_E.fm
MD-DR470H
ENGLISH
E-50