Advertisement
Error Messages
ERROR MES-
MEANING
SAGES
BLANK
Nothing is recorded.
(Replace the disc with a recorded disc.)
busy
A track is being moved.
Can'tC
You tried to record from a copy prohib-
ited MiniDisc.
You tried to record signals other than
music (such as data).
(Record using the analogue cable.)
Can'tE
A track cannot be edited.
(Change the stop position of the track and
then edit it.)
Can'tL
You tried to record or edit the MD
whilst operating the OPEN lever.
Can'tP
Cannot play the MD.
Can'tR
Recording cannot be performed correctly
due to vibration or shock.
Can'tS
The disc data cannot be read because
Can'tT(*)
the disc is damaged.
Can'tU
(Reload the Minidisc or replace it with an-
other one.)
Can'tSTAMP
Stamp function does not work.
(Check the number of tracks.)
Number or symbol appears in (*) position.
Error Messages
ERROR MES-
MEANING
SAGES
N-FULL
The number of a disc, group, or track
name exceeds 40.
(Shorten the name.)
NoDISC
A disc has not been loaded.
noSIG
Poor connection of the digital cable.
No output signal comes out from the
connected unit to playback.
(Use the AC power for the connected
unit.)
The input signal has improper sam-
pling frequency.
NoTRACK
There is no track to be played.
PLAYmd
You tried to record on a playback-only
disc.
POWER ?
The battery charger is defective.
PROTECTED
The write protection tab of a MiniDisc
is set to the protected position.
Sorry
Since a track number is currently be-
ing located or updated, the unit cannot
accept your command.
(Wait for a while and try the operation
again.)
T Form (*)
There is an error in the recording sig-
nal.
(Erase all of the tracks, and then record
again.)
Number or symbol appears in (*) position.
ERROR MES-
SAGES
Can'tW
Cannot save the TOC information cor-
rectly to a MiniDisc.
CH
You tried to operate whilst charging.
(displayed on
the main unit)
D-FULL
The disc is out of recording space.
DEFECT
The disc is scratched.
(If the recorded sound is not right, retry
recording or replace the disc with a re-
cordable one.)
Er-MD (**)
The microprocessor has reported a
system fault and the unit is out of or-
der.
(To have it repaired, go to the distributor
where you purchased the unit.)
G-FULL
The total number of groups exceeds
99.
(Erase unnecessary groups.)
HOLD
The unit is in the hold mode.
LoBATT
The rechargeable or alkaline battery
has run down.
LOCKED
You removed a MiniDisc whilst record-
ing or editing.
(Turn off the power before removing the
MiniDisc.)
ERROR MES-
SAGES
T-FULL
There is no space left for recording
character information (track names,
disc names, etc.).
TEMP!
The temperature is too high.
(Turn off the power, and wait for a while.)
Tr. Protect
The track has been protected from be-
ing erased.
(Edit the track with the device on which it
was recorded.)
?DISC
A disc which contains data other than
music was played.
(A disc which contains nonmusic data
cannot be played.)
?GrForm
The group recording or the GROUP
RESERVE function cannot be per-
formed.
(Erase the disc name and retry the same
operation.)
If the operation is not accepted, "--" may be displayed on the
main unit. For details, refer to the display on the remote con-
trol.
– 9 –
IM-MT899H/IM-MT899W
MEANING
MEANING
Advertisement
