Chapter 2 Hardware Installation; Preparations - SOYO SY-P4VGA User Manual

Hardware Installation
HARDWARE INSTALLATION
Congratulations on your purchase of SY-P4VGA Motherboard. You are
about to install and connect your new Motherboard.
Note: Do not unpack the Motherboard from its protective
anti-static packaging until you have made the following

preparations.

2-1 PREPARATIONS
Gather and prepare all the following hardware equipment to complete the
installation successfully:
1. Socket mPGA 478 processor with built-in CPU cooling fan (boxed type)
Note: This Motherboard supports non-boxed type CPUs. The heavier
CPU cooling fan requires the installation of a CPU support stand.
2. DDR or SDRAM memory module (s)
3. Computer case with adequate power supply unit (350W for
minimally loaded systems or 400W for fully loaded systems).
4. Monitor
5. PS/2 Keyboard
6. Pointing Device (mouse)
7. Speaker(s) (optional)
8. Disk Drives: HDD, CD-ROM, Floppy drive...
9. External Peripherals: Printer and Modem (optional)
10. VGA Card (optional)
Chapter 2
9
SY-P4VGA