SOYO SY-P4VGA User Manual page 90

3. Install the audio driver supplied on our driver disc.
4. Check BIOS setup if "AC97 Audio" is enabled.
5. If sound already installed, check our website for an audio driver
update.
The sound is working in my system, but when I play CD music from
the CD-ROM, I do not get any sound. What is wrong?
This is because the 4-wire audio cable from the CD-ROM to the on-board
CDIN connector or AUX connector on the M/B is not connected. See
manual for location of CDIN.
The sound and everything else works fine except that the recorder and
microphone do not work. What is wrong?
1. Please go to sound properties and check if the recorder and
microphone are enabled in the audio rack.
2. Check if the Microphone is ok.
Added PCI Audio Card does not work on this motherboard.
1. Go to "Integrated Peripherals\VIA Onchip PCI Device" and
Disable "AC97 Audio".
2. Go to integrated peripherals and Disable "Game port address"
and "Midi port address".
Hard disk/FDD/ CD-ROM issues
My Western digital HDD is not detected during boot-up
Change the jumper settings to cable select or single.
Sometimes the system finds my CD-ROM, sometimes not
1. Check CD-ROM if it is working properly.
2. The power supply might not have enough wattage to support all
the peripherals. If your system has other peripherals connected,
like CD-RW, extra HDD, etc. disconnect them.
86