SOYO SY-P4VGA User Manual page 52

BIOS Setup Utility
3-3.2 AGP & P2P Bridge Control
Caution: Change these settings only if you are already familiar
with the Chipset.
The [AGP & P2P Bridge Control] option changes the values of the chipset
registers. These registers control the system options in the computer.
AGP Aperture Size
AGP Mode
AGP Driving Control
x AGP Driving Value
AGP Fast Write
AGP Master 1 WS Write
AGP Master 1 WS Read
Enter:Select
:Move
F5:Previous Values
After you have completed the changes, press [Esc] and follow the
instructions on your screen to save your settings or exit without saving.
AGP & P2P Bridge Control
Setting
64M
AGP Aperture
Size
32M
128M
256M
AGP Mode 1X
2X
4X
Phoenix – Award BIOS CMOS Setup Utility
AGP & P2P Bridge Control
64M
4X
Auto
DA
Disabled
Disabled
Disabled
+/-/PU/PD:Value
F6:Fail-Safe Defaults
Description
Select the size of Accelerated Graphics
Port (AGP) aperture. The aperture is a
portion of the system memory
dedicated for graphics memory address
space (for when your VGA card runs
out of memory). Host cycles that hit
the aperture range are forwarded to the
memory without any translation.
This item allows you to enable /
disable the AGP-4X Mode.
Menu Level
F10:Save ESC:Exit
48
SY-P4VGA
Item Help
F1:General Help
F7: Optimized Defaults
Note
Default
Default