SOYO SY-P4VGA User Manual page 61

BIOS Setup Utility
SuperIO Device (Continue)
UART Mode
If [UART Mode Select] is set to [IrDA]/[ASKIR]
UR2 Function
Duplex
Onboard
Parallel Port
Parallel Port
Mode
If [Parallel Port Mode] is set to [ECP] or [ECP+EPP] mode
ECP Mode use
DMA
Others Optional
Game Port Address
Midi Port Address
If [Midi Port Address] is set to [330]/[300] mode
Midi Port IRQ
Setting Description
IrDA The second serial port offers
several special modes. It can
ASKIR
work as an infrared device (IrDA,
Normal
ASKIR) as a smart card reader
SCR
(SCR), or as a normal serial port.
Half Choose [Half] or [Duplex] to set
UR2 in half duplex mode or full
Full
duplex mode respectively. Refer
to your IR device specifications
to select the suitable mode.
Disabled Choose the printer I/O address.
378/IRQ7
278/IRQ5
3BC/IRQ7
SPP The mode depends on your
external device that connects to
EPP
this port.
ECP
ECP+EPP
3 Choose DMA3
1 Choose DMA1
Setting
Disabled
201
209
Disabled
330
300
5
10
Description
Set the I/O base address for
the ON board game port
under this item.
Set the I/O address for the
on board Midi port here.
Select the IRQ that the
Midi port uses under this
them.
57
SY-P4VGA
Note
Default
Default
Default
Default
Default
Note
Default
Default
Default