SOYO SY-P4VGA User Manual page 26

Hardware Installation SY-P4VGA
Line-in
Line-out
Mic-in
E. Other Connections
1. Standard Infrared (SIRCON)
Plug the 5-pin infrared device cable to the SIRCON header.
This will enable the infrared transfer function. This Motherboard meets
both the ASKIR and HPSIR specifications.
Please install according to the following pin assignment:
Standard Infrared
(SIRCON) Connector
SIRCON Pin Assignment
1 2 3 4 5
VCC
IRTX
IRRX
GND
22