SOYO SY-P4VGA User Manual page 19

Hardware Installation SY-P4VGA
Step 4 Connect cables, case wires and power supply
A. IDE Device Installation (HDD, CD-ROM)
Pin -1
IDE 2 IDE 1
Secondary Primary
IDE
IDE
This Motherboard offers two primary and secondary IDE device connectors
(IDE1, IDE2). It can support up to four high-speed Ultra DMA 33/66/100/133
HDD or CD-ROM.
Connect one side of the ATA66/100 flat cable to the IDE device (HDD or
CD-ROM) and plug the other end to the primary (IDE1) or secondary
(IDE2) directionally keyed IDE connector on the Motherboard. The
ATA66/100 cable is backward compatible with ATA33 HDDs.
This Motherboard can support up to 4 HDDs.
80-Conductor
ATA 66/100
Flat Cable
40-pin
1
39
39
1
15