Sharp AR-405 Operation Manual page 69

OK
CANCEL OK
POSITION
SELECT
DATE
STAMP
WATERMARK
PRINT
DIRECTION
SELECT
DATE
STAMP
PAGE
WATERMARK
NUMBER
TION
1 2 3
INT
4 5
6
7
8 9
AUDIT CLEAR PROGRAM
0
P
PLACE NEXT ORIGINAL. PRESS [START].
WHEN FINISHED, PRESS [READ-END].
AUTO AUTO A4
EXPOSURE PAPER SELECT
Press the lower "OK" key.
10
The TEXT STAMP menu will appear again.
Select the print direction.
11
If the PAMPHLET COPY function is used with this function, the
PAGE
NUMBER
portrait orientation (
Press the upper "OK" key.
12
OK
OK
Make all other desired copier selections and enter the
13
CLEAR ALL
desired number of copies.
CA
Press the START (
14
If the document feeder is used, scanning of originals and copying
START
will start.
If the document glass is used, proceed to the next step.
Replace the finished original with the next original after
15
the START (
the START (
have been scanned. Then, press the "READ-END" key
READ-END
on the touch panel.
Copying will start at this time.
100%
COPY RATIO
Up to 120 sheets of A4 (8-1/2" x 11") originals or up to 60 sheets
of originals larger than A4 (8-1/2" x 11") can be scanned.
To cancel the SELECT STAMP function, select the SELECT
STAMP function again and press the "CANCEL" key.
) must be selected.
) key.
) key indicator lights up, and then press
) key. Repeat this step until all originals
TEXT STAMP
3-35