[1] GENERAL [3] UNPACKING AND INSTALLATION The AR-D11 (1-stage paper feed unit) and the AR-D12 (2-stage paper feed unit) are optional paper feed units added to the digital copier, and 1. Unpacking their cassettes are common with those of the main machine.
Page 3
4. Attach the copier For copier models with two paper trays. Place the copier on the optional paper feed unit and remove the Turn off the main switch of the copier and then remove the power plug second and third paper trays. of the copier from the outlet.
Page 4
For two tray type 8. Remove the securing fixture for packing the paper feed unit and remove the packing material. Remove the securing fixture for packing that fixes the paper pressure plate of the tray by rotating it in the direction of the arrow and remove Relay harness for the packing material.
Page 5
4. Connect the harness. For copier models with one paper tray <1> Connect the cassette relay harness contained in the paper feed Turn off the main switch of the copier and then remove the power plug unit to the MCU PWB of the copier. of the copier from the outlet.
Page 6
8. Load paper into the paper tray. Do not exceed the maximum height line. Screw Right rear cabinet Screw Screw Rear cover 9. Check for center displacement. Screw Set an original on the document glass and copy it using the paper tray in the copier.
[4] EXTERNAL VIEW AND INTERNAL STRUCTURE 1. External view AR-D12 AR-D11 Name Name Paper feed tray Paper feed right cover 2. Internal structure Motors, sensors, solenoids, etc. Code Name Type Function/Operation Remark Interface PWB – Drive motor Hybrid Drives gears.
[5] OPERATIONAL DESCRIPTIONS [6] DISASSEMBLY AND ASSENBLY For disassembly, follow instructions of illustrations 1, 2, 3, ... in this sequence. For assembly, reverse the disassembly procedures. 1. Paper transport path For replacement of parts described in this manual, refer to the Parts Guide.
Page 9
3-A-2 2. Paper feed rollers Reference : Illust (1-1) B. Lift-up motor 3-B-1 3. Motors, clutches, belts C. Paper feed clutch / Transport clutch 3-C-1 A. Drive motor 3-A-1...
Page 17
b. Solder surface 2) Cassette sensor PWB a. Parts surface b. Solder surface CN1 (S6B-PH-K-S) 6 LUD 5 DRS 4 PAP 3 5V 2 PPD 1 SGND 3 DRS 2 N.C. 1 SGND...
Page 18
CAUTION FOR BATTERY DISPOSAL (For USA,CANADA) Contains lithium-ion battery. Must be disposed of properly. Remove the battery from the product and contact federal or state environmental agencies for information on recycling and disposal options.