Key Operator Code Number; Registering The Key Operator - Sharp AR-405 Operation Manual

KEY OPERATOR CODE NUMBER

A key operator code number must be registered before a key operator
program can be used. The key operator must remember this number. Only
this registered number will allow access to the key operator programs.
CUSTOM SETTINGS
DISPLAY KEY OPERATOR
CONTRAST PROGRAMS
AUTO AUTO A4
EXPOSURE PAPER SELECT
2 3
1
4 5
6
7
8 9
AUDIT CLEAR
PROGRAM
0
P
KEY OPERATOR PROGRAMS
COPIER COPIER PDA/ZR
PROGRAM LIST
TOTAL COUNT.
PRINTOUT.
KEY OPERATOR PROGRAMS
COPIER MODE
OTHER FUNCTION
TIMER SETTINGS
SETTINGS
ENABLE/DISABLE
ACCOUNT CONTROL
SETTINGS
8-2
Registering the key operator code number
Press the CUSTOM SETTINGS (
1
Press the "KEY OPERATOR PROGRAMS" key on the
2
touch panel.
EXIT
The following display will appear.
100%
COPY RATIO
INTERRUPT
Enter your key operator code number using the 10-key
3
pad.
CLEAR
C
When registering the key operator code number for the first time,
enter the number that was set at the factory. (See page 8-29.)
As the code number is entered, the dashes in the display will
change to asterisks.
EXIT
Press the "COPIER" key on the touch panel.
4
Press the "OTHER FUNCTION SETTINGS" key.
5
OK
KEY OPERATOR PROGRAMS
ENTER KEY OPERATOR CODE.
KEY OPERATOR CODE
- - - - -
) key.
EXIT