Sharp AR-405 Operation Manual page 53

O A4
URE PAPER SELECT
1 2 3
4 5
6
7 8 9
AUDIT CLEAR
PROGRAM
0
P
INTERRUPT
CLEAR ALL
CA
START
CLEAR
C
PLACE NEXT ORIGINAL. PRESS [START].
WHEN FINISHED, PRESS [READ-END].
AUTO A4
EXPOSURE PAPER SELECT
Check the copy paper selection.
7
If the AUTO IMAGE function is selected, reduction or enlargement
AUT
and image rotation will be automatically performed as required.
The AUTO IMAGE function is automatically selected when the
PAMPHLET COPY function is selected.
COP
In some regions, the AUTO PAPER SELECT function is
automatically selected in place of the AUTO IMAGE function.
Enter the desired number of copies.
8
INTERRUPT
CLEAR
C
Press the START (
9
If the document feeder is used, copying will start after all originals
are scanned.
If the document glass is used, proceed to the next step.
Replace the finished original with the next original after
10
the START (
the START (
READ-END
have been scanned. Then, press the "READ-END" key
on the touch panel.
AUTO IMAGE
70%
Copying will start at this time.
Up to 120 sheets of A4 (8-1/2" x 11") originals or up to 60 sheets
of originals larger than A4 (8-1/2" x 11") can be scanned.
If originals of different sizes are used, the copy paper size will be
determined based on the original that is scanned first. If originals
larger than the first original are used, a portion of the images may
not be copied.
You can make a pamphlet by folding the copies in two and
stapling them.
To cancel the PAMPHLET COPY function, select the PAMPHLET
COPY function again and press the "CANCEL" key.
PAMPHLET COPY
) key.
) key indicator lights up, and then press
) key. Repeat this step until all originals
3-19