Covers - Sharp AR-405 Operation Manual

COVERS

READY TO CO
READY TO COPY.(DOCUMENT FEEDER MODE)
SPECIAL MODES
MARGIN SHIFT ERASE
MULTI SHOT

COVERS

PAMPHLET COPY IMAGE EDIT
AUTO AUTO A4
EXPOSURE PAPER SELECT
The COVERS mode is used to place covers on the front, back, or both
the front and back of multipage documents.
Front cover sheets can be copied on, but only on the front side even
in the 1-sided to 2-sided and 2-sided to 2-sided copy modes.
The back side of the original designated as the cover will not be
copied.
Back cover sheets cannot be copied on, either on the front side or on
the back side.
Cover sheets must be fed from the bypass tray and must be the same
size as the copy paper being used to copy the document.
When the COVERS mode is selected, the stream feeding mode of
the RADF will always be off.
Place the originals in the document feeder tray.
1
Press the 2-SIDED COPY key and select the desired
2
duplex mode if needed. Press the "OK" key to close the
duplex selection window.
AUTO
Press the SPECIAL MODES key.
3
The SPECIAL MODES screen will appear.
Press the "COVERS" key on the touch panel.
4
The setting screen for COVERS will appear.
OK
DUAL PAGE
COPY
TRANSPARENCY
INSERTS
TEXT STAMP
100%
COPY RATIO
LOAD COVER STOCK INTO BYPASS-TRAY.
CANCEL
COVERS
PRINT ON FRONT COVER?
FRONT
YES
BACK
NO
FRONT+BACK
OK
OK
3-13