Image Editing Functions; Centring - Sharp AR-405 Operation Manual

IMAGE EDITING FUNCTIONS

The image editing functions include the following functions.
Centring: Shifts the image to the centre of copy paper when the
original and the copy paper are of different sizes.
Repeat copy: Produces repeated copies on a single sheet of copy
paper.
B/W reverse: Reverses the black and white areas.
Binding change: Rotates the image of originals for the second side
in the 1-sided to 2-sided copy mode.
These functions are selected by pressing the "IMAGE EDIT" key on
the SPECIAL MODES screen and pressing the key of each function.

CENTRING

READY TO COPY.
1. A4
2. A3
AUTO AUTO 8/ 11 1
2
EXPOSURE PAPER SELECT
3-20
When the original and copy paper are of different sizes, CENTRING is
used to shift the image as a whole to the centre of the copy paper.
The image will shift only in the left to right direction, not in the top to
bottom direction.
This function will not work when non-standard size originals or copy
paper are used. This function cannot be selected when enlargement
copying has been selected.
Place the originals in the document feeder tray or on the
1
document glass.
Press the "PAPER SELECT" key on the touch panel and
2
select the desired paper size.
100%
COPY RATIO
Press the SPECIAL MODES key.
3
The SPECIAL MODES screen will appear.
READY TO CO