Sharp AR-405 Operation Manual page 58

IMAGE EDITING FUNCTIONS
OK
CANCEL OK
BORDER LINE
4
16
1 2 3
4 5
6
7 8 9
AUDIT CLEAR
PROGRAM
0 P
INTERRUPT
CLEAR ALL
CA
START
CLEAR
C
PLACE NEXT ORIGINAL. PRESS [START].
WHEN FINISHED, PRESS [READ-END].
AUTO A3
EXPOSURE PAPER SELECT
3-24
Press the upper "OK" key.
8
Make all other desired copier selections and enter the
9
INTERRUPT
desired number of copies.
If the required area of the originals is not included on the copies,
select a proper reduction ratio.
CLEAR
C
Press the START (
10
If the document feeder is used, scanning of originals and copying
will start.
If the document glass is used in the SORT mode, proceed to the
next step.
Replace the finished original with the next original after
11
the START (
the START (
READ-END have been scanned. Then, press the "READ-END" key
on the touch panel.
AUTO IMAGE
Copying will start at this time.
100%
COPY RATIO
Up to 120 sheets of A4 (8-1/2" x 11") originals or up to 60 sheets
of originals larger than A4 (8-1/2" x 11") can be scanned.
To cancel the REPEAT COPY function, select the REPEAT
COPY function again and press the "CANCEL" key.
) key.
) key indicator lights up, and then press
) key. Repeat this step until all originals