TS600EX.book Page 42 Wednesday, April 5, 2006 12:25 PM
Wall Mounting
This unit can be mounted on a wall.
1
Press the tabs in the
direction of the arrows (1),
then remove the wall
mounting adaptor (2).
2
Tuck the telephone line cord
inside the wall mounting
adaptor, and push it in the
direction of the arrow (1
and 2).
• "UP WALL" should be facing
upward.
3
Drive screws (not included)
into the wall using the wall
template below. Connect the
telephone line cord. Mount the
unit, and slide it down.
Wall Template
42
To temporarily set the handset
down during a conversation,
place it as shown in this picture.
8.3 cm
2
1
Screws
8.3 cm
To Single-Line
Telephone Jack