Panasonic KX-TS600EX Operating Instructions Manual page 24

TS600EX.book Page 24 Wednesday, April 5, 2006 12:25 PM
Using the Caller List
If the Direct Dial button selected is
occupied, the display on the right will
be shown.
To overwrite, press [OK] (Yes key).
To select another empty Direct Dial
memory, press [
empty Direct Dial button by pressing
[ ], [ ] or [
M1 M2
• A long beep sounds.
• After a few seconds, the display will return
to the Caller List. You can continue storing
other items. To exit the Caller List, press
[ ] or wait for 60 seconds.
• To erase other stored items from the Direct Dial memory, see page
• To cancel during programming, press [
• You cannot store Caller List information in the Direct Dial memory if a phone
number is not displayed.
24
] (No key), press an
3
] (Save key).
M3
]. Start again from step 1.
M1 is occupied
Overwrite ?
[ ] =No [OK]=Yes
3
33
.