Recall Button - Panasonic KX-TS600EX Operating Instructions Manual

TS600EX.book Page 37 Wednesday, April 5, 2006 12:25 PM

RECALL Button

Pressing [R] allows you to use special features of your host PBX such as
transferring an extension call or accessing special telephone services
(optional) such as call waiting.
Selecting the recall time
The recall time depends on your telephone exchange or host PBX. You can
select the following recall times: "80, 90, 100, 110, 160, 200, 250, 300, 400,
600, 700, 900 ms (milliseconds)". Your phone default setting is "100ms".
Make sure that the handset is on the cradle and the Speakerphone/
headset [s/W] indicator light is off.
1
Press [l].
2
Scroll to "Program ?" by pressing [ ] or
[ ], and press [OK] (Yes key).
3
Scroll to "Set recall time?" by
pressing [ ] or [ ].
4
Press [OK] (Yes key).
5
Select the desired time by pressing
[ ] or [ ].
6
Press [OK] (Save key).
• A long beep sounds.
• The display will return to step 3. To exit
the programming mode, press [
wait for 60 seconds.
• You can exit the programming mode any time by pressing [
• If the unit is connected via a PBX, PBX functions (transferring a call, etc.) might
not work correctly. Consult your PBX supplier for the correct setting.
• If there is no battery, Recall function may not operate properly.
Set recall time?
34
Recall time
:100ms
[ OK ] = Save
34
] or
].
[ OK ]=Yes
37