Panasonic KX-TS600EX Operating Instructions Manual page 33

TS600EX.book Page 33 Wednesday, April 5, 2006 12:25 PM
If the Direct Dial button selected is
occupied, the display on the right will
be shown.
To overwrite, press [OK] (Yes key).
To select another empty Direct Dial
memory, press [
an empty Direct Dial button ([M1], [M2]
or [M3]).
• A long beep sounds.
• To continue storing other items, repeat from step 2.
• To exit the programming mode, press [
• To erase other stored items from the Direct Dial memory, see below.
• When using the Dial Lock (p. 39) or Call Restriction feature (p. 40), you cannot
store a phone number in the Direct Dial memory ([M1], [M2] or [M3]).
• You can exit the programming mode any time by pressing [
• If a pause is required for dialing, press
also store [R] in a phone number. Pressing
(p. 35, 37).
To erase a stored number
1
Press the required Direct Dial button
([M1], [M2] or [M3]).
2
Press [C].
• To cancel erasing, press [
3
Press [OK] (Yes key).
• A long beep sounds.
• To exit the programming mode, press [
] (No key), then press
3
[ ]
where needed. If required, you can
[ ]
3
] (No key).
] or wait for 60 seconds.
M1 is occupied
Overwrite ?
[ ] = No [OK]=Yes
3
] or wait for 60 seconds.
].
or [R] counts as one digit
Erase ?
[ ]=No [OK]=Yes
3
Erased
Memory Empty
33