Setting The Password - Panasonic KX-TS600EX Operating Instructions Manual

TS600EX.book Page 38 Wednesday, April 5, 2006 12:25 PM
Special Features

Setting the Password

You can change the password for the dial lock and call restriction. The
factory preset password is "1111".
To set the password
Make sure that the handset is on the cradle and the Speakerphone/
headset [s/W] indicator light is off.
1
Press [l].
2
Scroll to "Program ?" by pressing [ ] or
[ ], and press [OK] (Yes key).
3
Scroll to "Change password?" by
pressing [ ] or [ ].
4
Press [OK] (Yes key).
5
Enter the current password.
6
Press [OK] (Next key).
• If the wrong password is entered, 3 beeps
will sound. Enter the correct password.
7
Enter a new password using a 4-digit
number. (Example: "1234" is entered.)
8
Press [OK] (Save key).
• A long beep sounds.
• The display will return to step 3. To exit
the programming mode, press [
wait for 60 seconds.
• You can exit the programming mode any time by pressing [
Please write down your password. If you forget your password, consult your
nearest Panasonic service center.
38
Change password?
34
Current password
:----
Current password
:
¢¢¢¢
New password
:----
New password
:1234
] or
].
[OK]=Yes
[OK]=Next
[OK]=Next
[OK]=Save
[OK]=Save