Cordless Handset - Panasonic KX-FC265E Operating Instructions Manual

Feature
Changing the fax activation
code
MBNM4NM1N
Setting the memory reception
alert
MBNM4NM4N
Setting friendly reception
MBNM4NM6N
Setting the auto
disconnection
MBNM4NM9N
Changing the greeting
message time for TAM/FAX
MBNM5NM4N
Setting the scan contrast
MBNM5NM8N
Copying phonebook data
from the base unit to the

cordless handset

MBNM5NM9N
Screening the incoming call
MBNM6NM7N
Selection
If you wish to use an extension telephone (page 33) to receive faxes, activate
this feature and program the activation code.
M0N "OFF"
M1N "ON" (default)
1. MMENUN A MBNM4NM1N
2. Press M1N to select "ON". A MSETN
3. Enter your code from 2 to 4 digits, using 0-9, MGN and MBN.
R The default code is "H#9".
4. MSETN A MMENUN
To alert you with a beeping sound when a received fax document is stored into
memory due to some existing problem.
M0N "OFF": Deactivates this feature.
M1N "ON" (default): You will hear a beeping sound.
Note:
R The slow beeps will continue until you clear the printing problem and make
sure the unit is supplied with enough paper to print the stored document.
To receive a fax automatically when you answer a call and hear a fax calling
tone (slow beep).
M0N "OFF": You have to press MFAX STARTN for fax reception.
M1N "ON" (default): You do not have to press MFAX STARTN for fax reception.
To answer a call with an extension telephone in TEL/FAX mode (page 33), or
TAM/FAX mode (page 34) activate this feature and program the code.
M0N "OFF"
M1N "ON" (default)
1. MMENUN A MBNM4NM9N
2. Press M1N to select "ON". A MSETN
3. Enter your code from 2 to 4 digits, using 0-9 and MGN.
R The default code is "H0".
4. MSETN A MMENUN
M1N "16s" (default): Maximum greeting message time is 16 seconds.
M2N "60s": Maximum greeting message time is 60 seconds.
See page 38 for details.
To send or copy a document with faint or dark writing, set this feature before
transmission or copying.
M1N "NORMAL" (default): Used for normal writing.
M2N "LIGHT": Used for dark writing.
M3N "DARKER": Used for faint writing.
M1N "1 ITEM" (default)
M2N "ALL ITEMS"
See page 52 for details.
To hear an incoming call from the speaker when the answering machine is
recording the message.
M0N "OFF"
M1N "ON" (default)
7. Programmable Features
45