Table of Contents
Advertisement
Note:
R Shipping tape positions are subject to change without
notice.
1.6.2 Cordless handset
A
B
A Charge indicator
Ringer indicator
B Speaker
C Receiver
D Microphone
E Charge contacts
1.7 Ink film
The supplied film roll is a starter ink film.
1
Open the front cover.
C
D
E
1. Introduction and Installation
2
Release the back cover by pushing the green button
(A).
3
Open the back cover.
4
Insert the blue gear of the ink film roll into the front
left slot of the unit (B) and the white gear of the ink
film roll into the rear left slot of the unit (C).
R The ink film is safe to touch and will not rub off on
your hands like carbon paper.
R Make sure the blue gear (B) and white gear (C)
are installed as shown.
B
A
C
15
Advertisement
Table of Contents
