Table of Contents
Advertisement
Connections and Setup
2 Preparation
2.1 Connections
Caution:
L When you operate this product, the power outlet
should be near the product and easily
accessible.
L Be sure to use the telephone line cord supplied
with this unit.
L Do not extend the telephone line cord.
1 Telephone line cord
L Connect to a single telephone line jack.
2 Power cord
L Connect to a power outlet (220 V – 240 V,
50/60 Hz).
3 [EXT] jack
L You can connect an extension telephone.
Remove the stopper if attached.
4 Extension telephone (not supplied)
1
2
Note:
L If any other device is connected to the same
telephone line, this unit may disturb the network
condition of the device.
L If you use the unit with a computer and your internet
provider instructs you to install a filter (5), please
connect it as follows.
5
3
4
2.2 Dialling mode
If you cannot dial (page 17, 21), change this setting
according to your telephone line service.
{MENU}
1
{MENU} i {#}{1}{3}
2
Press {1} or {2} to select the desired setting.
{1} "PULSE": For rotary/pulse dial service.
{2} "TONE" (default): For tone dial service.
3
{SET}
4
Press {MENU} to exit.
2. Preparation
{SET}
DIAL MODE
=TONE
[±]
13
Advertisement
Table of Contents
