Table of Contents
Advertisement
Troubleshooting guide
Photo
The contents of the SD card cannot be read.
Remove the card from the slot and then insert again. If
this does not solve the problem, turn off and turn on the
unit again.
Copying, deleting and setting protection
takes a long time.
When there are a lot of folders and files, it may
sometimes take a few hours.
Photos do not playback normally.
The images that were edited on the PC, such as
PROGRESSIVE JPEG, etc., may not play back. (
Music
Tracks could not be copied to the HDD.
If there are copyright protected tracks such as SCMS
restrictions, they will not be copied.
Recording from CDs that do not conform to CD-DA
specifications (copy control CDs, etc.) cannot be
guaranteed.
USB
This unit does not recognize the USB
connection correctly.
If inserted during playback the USB device may not be
recognized by this unit.
Disconnect and reconnect the USB device. If it still does
not recognize the connection, turn this unit off and on
again.
USB devices connected using a USB hub may not be
recognized by this unit.
96
VQT3C77
TV Guide
The TV Guide System does not receive any
data.
If signal quality is bad (ghost images or limited
reception), the TV Guide system may not be able to
receive any data.
The empty field is displayed for some or all
channels.
Some channels are not supported by the TV Guide
system.
The TV Guide information is not displayed
properly.
103)
Set the clock correctly. (
There was a programme change, or TV Guide
information from a broadcast station was possibly not
correctly transmitted.
Check the current programme, e.g. on the Web site for
the TV Guide system provider or station provider.
The TV Guide data transfer was interrupted.
The TV Guide system shows the data that was received
up to the interruption.
The programme information may be incomplete.
The TV Guide data is not updated.
You cannot download TV Guide data during recording in
the following cases.
– "One cable" has been selected in "Easy Setting" or
"Auto Setup". (
– "Single Cable" has been selected in "Antenna System"
and one user band is disabled. (
87)
20, 79)
23, 80)
Advertisement
Table of Contents
