Rewind Live Tv/Pause Live Tv - Panasonic Diga DMR-XS400 Operating Instructions Manual

Table of Contents

Advertisement

REWIND LIVE TV/PAUSE LIVE
TV
This unit temporarily saves a live TV programme you are
watching with this unit's tuner on HDD and you can use the
following functions.
∫ REWIND LIVE TV
You can rewind live TV programme up to 1.5 hours
before as long as temporary save has not been stopped.
∫ PAUSE LIVE TV
You can pause live TV programme and restart watching
from the paused position.
≥PAUSE LIVE TV also works when watching a
programme via external input.
Select the HDD drive to perform these functions correctly.
1
While watching TV
(REWIND]LIVE]TV)
Press [SLOW/SEARCH 6] to rewind.
≥"REWIND LIVE TV" appears on the unit's display.
(PAUSE]LIVE]TV)
Press [PAUSE ;] to pause.
≥"PAUSE LIVE TV" appears on the unit's display.
Pause
8:05
8:10
2
When you want to resume
Press [PLAY/a1.3 1].
≥You can perform search or Quick View, etc.
≥If temporary save stops (
performed by that point.
9:35
right), playback will be
Display information
∫ While pausing or rewinding a broadcast:
Press [STATUS
Pause
8:05
≥Press [STATUS
] again.
6:53:12 01.01.2011
Play 6:53.50
∫ While pausing a programme via external input:
Press [STATUS
6:53:12 01.01.2011
Play 6:53.50
1 The time that you can rewind the live programme.
2 The amount of time temporarily saved on HDD
(maximum: 1.5 hours).
3 The time of the current playback position.
4 The time which is 1.5 hours after PAUSE LIVE TV or
REWIND LIVE TV started.
≥After 1.5 hours from PAUSE LIVE TV or REWIND LIVE
TV started, current time is displayed.
To stop REWIND LIVE TV or PAUSE LIVE TV
1 Press [STOP ∫].
2 Select "Yes", then press [OK].
To hide the display information
Press [EXIT].
≥ Temporary save stops in the following cases:
– When switching to other channels or other screen
– When recording of the watching programme is started
– When timer recording is started
– When performing PAUSE LIVE TV or REWIND LIVE TV for more than
8 hours (This may vary depending on the HDD free space.)
≥ These functions do not work in the following cases:
– When the clock is not set
– When set clock manually (Copy protected title (Copying is prohibited)
only) (
13)
– While recording 2 programmes simultaneously
– While copying
– While watching a programme being recorded
– When a radio programme is selected
– While watching an encrypted programme
– (REWIND]LIVE]TV) When "REWIND LIVE TV" is set to "Off" (
– (PAUSE]LIVE]TV) When a timer recording via external input is started
while watching a programme via external input
≥ (PAUSE]LIVE]TV) You can operate this unit with the TV remote control by
using VIERA Link (
72).
Refer to the TV operating instructions for operation.
≥ (PAUSE]LIVE]TV) When you connect the TV with a HDMI cable and a 21-
pin Scart cable, it is possible to pause programmes that cannot be
received with the tuner of this unit (
].
9:35
8:50
].
16).
81)
27
VQT3C77

Advertisement

Table of Contents
loading

Table of Contents