Panasonic Diga DMR-XS400 Operating Instructions Manual page 45

Partial deleting
[HDD] [RAM]

Start
End
Next
Continue
0:43.21
Please set the start
Start End
point with playback
operation and skip.
OK
RETURN
1 Select "Partial Delete" in "Edit", then
press [OK].
2 Press [OK] at the start point and end point
to delete.
≥Press [PLAY/a1.3 1] to start the playback when the
title is paused.
3 Select "Continue", then press [OK].
≥Select "Next", then press [OK] to delete other sections.
Up to 20 sections can be set. (
4 Select "Delete", then press [OK].
≥Chapter Mark is generated in the scene that was
partially deleted.
5 Press [RETURN
≥ You can find the desired point by using search or Time slip function, etc.
≥ You cannot set points if they are too close to each other. You cannot set
an end point before a start point.
≥ This function cannot be used on encrypted titles (
Dividing title
[HDD] [RAM]
PLAY
Divide
Preview
Continue
0:00.22
Divide
OK
RETURN
1 Select "Divide Title" in "Edit", then press
[OK].
2 Press [OK] at the point to divide the title.
3 Select "Continue", then press [OK].
4 Select "Divide", then press [OK].
≥To confirm the division point
Select "Preview", then press [OK]. (The unit plays
10 seconds before and after the division point.)
≥To change the division point
Restart play and select "Divide", then press [OK] at the
division point.
go to step 2)
].
).
≥ Video and audio just before and after the division point may momentarily
cut out.
≥ [HDD] Divided titles form a group of titles.
≥ You can find the desired point by using search or Time slip function, etc.
≥ This function cannot be used on encrypted titles (
Changing thumbnail
[HDD] [RAM] [DVD-R] [DVD-RW] [+R] [+RW]

Change
Finish
0:00.22
Start play and select the image of
Change
a thumbnail.
OK
RETURN
1 Select "Change Thumbnail" in "Edit", then
press [OK].
2 Press [PLAY/a1.3 1] to start play.
3 Press [OK] at the point to use as a
thumbnail.
≥To change the point
Restart play and select "Change", then press [OK] at
the point to change.
4 Select "Finish", then press [OK].
≥ [DVD-R] [DVD-RW] [+R] [+RW] It is possible to change the image displayed
on the Top Menu after finalising or creating Top Menu.
≥ You can find the desired point by using search or Time slip function, etc.
≥ This function cannot be used on encrypted titles (
Changing programme type of title
[HDD]
Programme type information in the title can be edited.
Change Prog.Type
Select the item for prog.type change.
Prog.Type 1 Movie
Prog.Type 2 ( No Prog.Type )
Prog.Type 3 ( No Prog.Type )
Set Cancel
OK
RETURN
1 Select "Change Prog.Type" in "Edit", then
press [OK].
2 Select the item to change a programme
type, then press [OK].
3 Select the programme type, then press
[OK].
4 Select "Set", then press [OK].
).
).
45
VQT3C77