Network - Panasonic Diga DMR-XS400 Operating Instructions Manual

Deep Colour Output
This setting is for selecting whether to use Deep Colour
output when a TV that supports Deep Colour is
connected.
HDMI Audio Output
Select "Off" when connected to a TV with an HDMI
cable, and connected to an amplifier not compatible
with HDMI with a DIGITAL AUDIO OUT terminal.
Contents Type Flag
Depending on the playback content, the TV will output
adjusting to the optimal method when a TV that
supports Contents Type Flag is connected.
VIERA Link
Set to use "HDAVI Control" function when connected
with an HDMI cable to a device that supports "HDAVI
Control".
≥Select "Off" when you do not want to use "HDAVI
Control".
∫ AV1 Output
Set according to the terminal of the connected TV.
∫ AV2 Settings
Connection
AV2 Settings
AV2 Input
Ext Link
AV2 Settings
AV2 Input
Set according to the output from the external
equipment.
Ext Link
Set "Ext Link 1" when a Set Top Box which transmits a
control signal via the 21-pin Scart cable is connected.
≥This setting cannot be made when "TV System" is set
to "NTSC" ( 84).
∫ Common Interface
Access to software contained on CI module. (
≥Select "Slot 1:" or "Slot 2:" and press [OK].
Follow the on-screen instructions.
≥ On-screen instructions may not correspond to the remote control
buttons.
≥ For more information about TV service, please contact your service
provider.
≥ Depending on the card, in some cases its use together with this unit may
be limited or not possible.

Network

Setup
Network
∫ Network Easy Setting
Press [OK] to start Network Easy Setting. (
∫ Network Settings
Network
Network Settings
IP Address / DNS Settings
Check the connection of the network or set the IP
address and DNS.
≥Press [OK] to show the respective setting.
≥ "Connection Speed Setting" is enabled only when "Connection
Speed Auto-configure" is turned "Off".
Proxy Server Settings
Check and set the connection to the Proxy server.
≥Press [OK] to show the respective setting.
Internet Content Settings
Network Settings
Internet Content Settings
Lock
You can restrict using VIERA CAST.
≥Follow the on-screen instructions.
12)
≥PIN is required to change. (
Automatic Volume Control
Volume that is different depending on the contents is
adjusted automatically to the standard volume while
using the VIERA CAST.
≥Depending on contents, this function will not work.
≥Select "Off" when the audio is warped.
Network
Network Easy Setting
Network Settings
Network Settings
IP Address / DNS Settings
Proxy Server Settings
Internet Content Settings
Home Network ( DLNA ) Server Settings
Internet Content Settings
Lock
Automatic Volume Control
21)
78)
85
VQT3C77