Hdd / Disc - Panasonic Diga DMR-XS400 Operating Instructions Manual

Changing the unit's settings
∫ Signal Condition
You can check the quality and strength of signals.
≥Press [2, 1] to select the LNB.
≥Press [CH W X] to select the channel.
e.g.,
Signal Quality 0
0
Signal Strength
Satellite
Parameter MHz,V,
Change Input
RETURN
Signal Quality
Red bar The signal quality is bad.
Yellow bar The signal quality is poor.
Green bar The signal quality is good.
Signal Strength
0 Signal strength is 0%.
10 Signal strength is 100%.
≥When the signal is too strong (red bar), reduce the signal
amplification at your aerial.
≥When the signal is weak:
– adjust the position and direction of the dish.
– check that the current digital broadcast channel is
correctly broadcasting.
∫ Antenna System
You can receive several satellites if you have DiSEqC
control antenna system or single cable router.
1 Select "Antenna System".
2 Press [2, 1] to select antenna system.
One LNB Compatible with Single LNB.
MiniDiSEqC Up to 2 LNBs can be controlled.
DiSEqC1.0 Up to 4 LNBs can be controlled.
Single Cable Compatible with single cable router.
≥This unit supports DiSEqC Version 1.0.
∫ LNB Configuration
You can set LNB setting and User Band when necessary.
≥If you do not know the connected satellite, select "No
Satellite" in "Satellite". (Available satellite will be searched
in Auto Setup.)
≥If you select "User defined" in "Satellite", set "Test
Transponder Frequency" manually.
∫ Preferred Language
Select the language for multi broadcast.
If the selected language is not available, then the original
language will be selected.
80
VQT3C77
10
10
kS/s
Channel Up
Channel Down

HDD / Disc

Setup
HDD / Disc
HDD / Disc
Settings for Playback
Settings for Recording
HDD Management
∫ Settings for Playback
HDD / Disc
Settings for Playback
Settings for Playback
Soundtrack
Subtitles
Menu
DVD-Video Parental Control
Subtitle Text
Soundtrack
Select the audio language.
≥If "Original" is selected, the original language of each
disc will be selected.
≥Enter a code with the number buttons when you
select "Other ¢¢¢¢". (
Subtitles
Select the language for subtitle.
≥If "Automatic" is selected and the language selected
for "Soundtrack" is not available, subtitles of that
language will automatically appear if available on that
disc.
≥Enter a code with the number buttons when you
select "Other ¢¢¢¢". (
Menu
Select the language for disc menus.
≥Enter a code with the number buttons when you
select "Other ¢¢¢¢". (
DVD-Video Parental Control
Set a rating level to limit DVD-Video play.
≥Follow the on-screen instructions.
≥PIN is required to change. (
Subtitle Text
Select the language for DivX and MKV subtitles text
( 99).
≥This item is displayed only after playing back a DivX
or MKV file with subtitle text.
88, Language code list)
88, Language code list)
88, Language code list)
78)