Panasonic Diga DMR-XS400 Operating Instructions Manual page 22

Settings
∫ Network Easy Setting ( Internet
Connection Test )
≥If there is no problem, the following screen is displayed.
Network Easy Setting (Internet Connection Test)
Completed.
- Connection to the Internet : Pass
Network connection check has finished.
Internet functions are available.
Press OK.
OK
≥If there is any problem, the following message is
displayed on the screen.
Display
Cannot find the
server. (B019)
No connection
could be made to
the server. (B020)
To restart Network Easy Setting
1 Press [FUNCTION MENU].
2 Select "Setup" in "Others", then press [OK].
3 Select "Network Easy Setting" in "Network", then press
[OK].
To redo settings individually
1 Press [FUNCTION MENU].
2 Select "Setup" in "Others", then press [OK].
3 Select "Network Settings" in "Network", then press [OK].
4 Select "IP Address / DNS Settings" (
Server Settings" (
Check security before using Home Network ( DLNA )
Server function
If you set "Home Network ( DLNA ) Server function" to "On",
all connected devices on the same network can access this
unit. Ensure that the router for your home network has
adequate security system to prevent unauthorized access.
22
VQT3C77
Check the following
≥"Primary DNS" and "Secondary
DNS" settings of "IP Address /
DNS Settings" ( 85)
≥The server may be busy or the
service may have been
suspended. Please wait a few
moments, and then try again.
≥Settings of "Proxy Server
Settings" ( 85) and the router
85) or "Proxy
85), then press [OK].
≥ Refer to the operating instructions of the hub or router.
≥ Home Network ( DLNA ) Server function setting can be set only when
you selected "Off" for "Power Save in Standby" in "Easy Setting". (
step 5)
≥ Even if you set "Home Network ( DLNA ) Server function" to "Off", it is
possible to set to "On" later. (
≥ You can perform this setup anytime by selecting "Network Easy Setting"
in the Setup menu. ( 85)
≥ You can redo these settings individually using "Network Settings".
( 85)
86)
20,