Ci Module - Panasonic Diga DMR-XS400 Operating Instructions Manual

Table of Contents

Advertisement

CI module

An appropriate CI module is required to view or record the encrypted broadcast.
You need a CI module, CAM (Conditional Access Module) together with a certified Smart Card, and a subscription with the
corresponding broadcaster.
≥If not viewing/recording an encrypted broadcast, you do not need to insert the CI module.
1
Insert the certified Smart Card into the CAM (both optional).
CAM
2
Insert the CI module into the CI (Common Interface) slot of this unit.
This unit
TV service encryption is automatically cancelled and the service can be viewed or recorded. (The recording might be
prohibited by broadcasters.)
≥Depending on the CI module, a PIN may be demanded. If prompted to enter a PIN code, enter the set PIN code with the
number buttons.
Notes for recording of an encrypted broadcast (
≥ You can insert one or two different CAMs with Smart Cards into this unit.
≥ Be sure to insert the CI module horizontally into the slot.
≥ Insert the CAM and the Smart Card with the correct direction.
≥ When removing the CI module, press the CI module eject button and pull it straight out.
≥ For more details, see the manual of the CAM and Smart Card, or consult the dealer.
≥ The Common Interface supports the modules according to DVB Specification and CI Plus Specification.
≥ Turn off the unit before you insert or remove the CI module.
12
VQT3C77
Smart Card
CI module
CI (Common Interface) slot
31)
CI module

Advertisement

Table of Contents
loading

Table of Contents