Lpr Printing; Operations On This Machine; Printer Driver Settings (For Windows 2000/Xp/Server 2003) - Konica Minolta BIZHUB C450P User Manual

Setting up the printer driver

LPR printing

The LPR print service is supported as a standard in Windows 2000, Windows
XP, Windows NT 4.0, and Windows Server 2003. TCP/IP is used as the net-
work protocol.

Operations on this machine

Set the IP address for this machine. For the setting procedure, refer to "Set-
ting the IP address for this machine" on page 2-30.

Printer driver settings (For Windows 2000/XP/Server 2003)

1
For Windows 2000, click the [Start] button, point to "Settings", and
then click "Printers". For Windows XP/Server 2003, click the [Start] but-
ton, and then click "Printers and Faxes".
2
Right-click the icon of the installed printer, and then click "Properties".
3
On the Ports tab, click the [Add Port] button.
4
In the "Available Printer Ports" list, select "Standard TCP/IP Port", and
then click the [New Port] button.
5
When the Add Standard TCP/IP Printer Port Wizard starts up, click the
[Next] button.
6
In the "Name of printer or IP address" box, enter the IP address for this
machine, and then click the [Next] button.
7
Select "Custom", and then click the [Settings] button.
8
Select "LPR", enter "Print" in the "Queue Name" box, and then click the
[OK] button.
9
Click the [Next] button, and then click the [Finish] button to apply the
setting.
C450P
2
2-37