Konica Minolta BIZHUB C450P User Manual page 295
Hide thumbs
Also See for BIZHUB C450P:
- System administrator manual (52 pages) ,
- User manual (502 pages) ,
- User manual (460 pages)
Table of Contents
Advertisement
Replacing consumables
7
Swing the toner-cartridge-securing
lever up clockwise.
–
Make sure that the toner-car-
tridge-securing lever is fully
swung up, as shown, otherwise
the front door cannot be closed.
8
Slowly pull out the charger-cleaning
tool as far as possible.
Next, slowly push in the charger-
cleaning tool as much as possible.
Repeat the above operations three
times.
9
Securely insert the charger-cleaning tool, and then close the front door.
Why can't the door be closed securely?
?
% The toner-cartridge-securing lever may not be in its correct posi-
tion. Check that the toner-cartridge-securing lever is correctly po-
sitioned.
Reminder
Be careful about the installation location of the toner cartridges, since it
is different for other colors.
Reminder
When installing the new filter 2, fully in-
sert it until it snaps into place.
C450P
6
6-7
Advertisement
Table of Contents
Troubleshooting
