Konica Minolta BIZHUB C450P User Manual page 39

Installation and operation precautions
No. Part Name
6 Finisher FS-603
7 Punch Kit PK-501
8 Finisher FS-507
9 Job Separator JS-601
10 Mount Kit MK-703*
11 Local Interface Kit EK-702*
12 Dehumidifier Heater 1C*
13 Mechanical Counter MC-501*
14 Hard Disk Drive HD-501*
* Parts marked with an asterisk (*) are internal options and therefore are not shown in the illustra-
tion.
C450P
Description
Feeds out printed pages. The "Offset" setting (sep-
arating), Staple settings (stapling), and "Fold & Sta-
ple" function (binding) are available.
• In order to install the finisher, the main unit must
be installed on the desk, on the LCT, on the sin-
gle paper feed cabinet, or on the double paper
feed cabinet.
Allows hole punching to be used if installed onto
Finisher FS-603
Referred to as the "punch kit" throughout the man-
ual.
Feeds out printed pages. The "Offset" setting (sep-
arating), Staple settings (stapling), and Punch set-
tings (hole punching) are available.
• In order to install the finisher, the main unit must
be installed on the desk, on the LCT, on the sin-
gle paper feed cabinet, or on the double paper
feed cabinet.
Print exit tray installed on Finisher FS-507
Referred to as the "job separator" throughout the
manual.
Required to mount the local interface kit
Used for making a local connection between this
machine and the computer
Installed in the paper feed cabinet or desk to pre-
vent humidity from collecting in the paper
Shows the total number of black printouts made
Operations using the "Secured Print" and "Save in
User Box" settings can be used if the hard disk
drive is installed.
1
1-19