Setting up the printer driver
5
In Administrator mode of PageScope Web Connection, select "Net-
Ware" from the Network tab, and then specify the following settings.
–
NetWare Print: Select "Enable".
–
Frame Type: Select "Auto". (Select the frame type according to the
network environment.)
–
Mode: Select "Pserver".
–
Print Server Name: Specify the print server name created in step 4.
–
Print Server Password: Specify only when setting from the NetWare
server.
–
Print Queue Scan Rate: Specify "1". (Change as necessary.)
–
Bindery/NDS: Select "NDS".
–
Preferred NDS Context Name: Specify the name of the context that
connects to Pserver.
–
Preferred NDS Tree Name: Specify the name of the tree that Pserv-
er logs on to.
6
Restart this machine (turn it off, then on again).
7
Use the NetWare server console to load MONITOR.NLM.
C450P
2
2-51