Logging On To Administrator Mode - Konica Minolta bizhub 350 User Manual

Specifying settings using PageScope Web Connection
No. Item
4 Status display
5 Message display
6 Device name
7 [Log-out] button
8 Tabs
9 Menu
10 Information and settings
Note
To reset the status display and message display, click [Refresh] in the
browser.

Logging on to Administrator mode

You can switch between User mode and Administrator mode. However, you
must be logged on to Administrator mode in order to specify system or net-
work settings.
0 When logged on to Administrator mode, the control panel of this machine
is locked and cannot be used.
0 Depending on the status of the machine, you may not be able to log on
to Administrator mode.
0 When logged on to Administrator mode, a timeout occurs and you will
automatically be logged off from Administrator mode if no operation is
performed for 10 minutes.
200/250/350
Description
The statuses of this machine's printer section and scanner
section are displayed using icons.
If an error occurred in the machine, the status of the mal-
function/error and other error information are displayed.
The name of the device being accessed is displayed.
This button appears after you have logged on when user
authentication settings have been applied. Click this but-
ton to log off.
Select the category of the page to be displayed. The fol-
lowing tabs are displayed in User mode.
• System
• Job
• Print
• Scan
Note
If the optional fax kit has been installed, the
Fax/Scan tab appears.
Information and settings for the selected tab are listed.
The menu that appears differs depending on the tab that
is selected.
Details of the item selected from the menu are displayed.
6
6-7