Network Connection Methods That Can Be Selected In Each Windows Operating System - Konica Minolta BIZHUB C450P User Manual

3
Network connection methods that can be selected in each Windows
operating system
This chapter describes the settings that must be specified for network
printing.
Setting procedures differ depending on the method of networking printing
used (SMB, LPR, or IPP printing). Select the best method of network printing
for your Windows environment.
Network printing from a Windows operating system
SMB Print-
ing
LPR Printing
IPP Printing
Port 9100
Printing
* When using Port 9100 printing under Windows 98SE or Windows Me, it may be necessary to
install the Peer to Peer Printing Tool. For details, refer to the table below.
Conditions when the Peer to Peer Printing Tool must be installed while using
Port 9100
Driver type
Konica Minolta
PCL
Konica Minolta
PostScript
PostScript PPD
*1
If the printer driver is installed using the installer while this machine is
connected to the network, the required Peer to Peer Printing Tool is also
installed automatically, and Port 9100 is created.
*2
The printer driver is not compatible with the operating system.
*3
Installing the printer driver using the installer is not applicable.
*4
Not required since standard operating system functions are used.
To obtain the Peer to Peer Printing Tool, consult the dealer where you
purchased this machine.
3-32
Proto- Win- Win-
col Used dows dows
98SE Me
TCP/IP, o o
NetBEUI
TCP/IP
TCP/IP
TCP/IP +* +*
Operating System
Windows 98SE/Me
Using installer Not using in-
staller
*1
Not required Required
*2
-
*3
- Required
Setting up the printer driver
Win- Win- Win-
dows dows XP dows NT
2000 4.0
o o
o o o
o o
o o
Windows 2000/XP/2003
Using installer
*4
Not required
*2
-
bizhub C450P (Phase 3)
Win-
dows
Server
2003
o
o
o
o
Not using in-
staller