Supplies & Handling
11.4
Emptying Dust Boxes
Even when the punch dust box of the Finisher FS-511 is full, the message is
not displayed. Before using punch mode, perform the following procedure to
check if the punch dust box, if needed. To empty the dust box, see the
following pages.
When the punch dust box of the Punch unit PU-501 mounted on the Finisher
FS-510, the following message will be displayed on the screen, and the
finished set will be output without being punched. To empty the dust box,
see page 11-24.
bizhub 500/420
11
11-21