To Make Double-Sided Copies Using Original Glass - Konica Minolta BIZHUB 500 User Manual

4

To make double-sided copies using original glass

Follow the procedure below to make double-sided copies from the original
using the original glass.
0 The Separate Scan mode will function automatically.
0 The double-sided copies can be made with top margin created (arranged
upside down on the reverse side). For details, see "Creating Margin of
Copy Image (Page Margin)" on page 6-70.
0 Specify the Original Direction according to the orientation of the original
positioned on the original glass. For details, see "Specifying Position of
Binding Margin (Margin)" on page 5-18.
1
Open the ADF.
2
Position the original on original glass, then close the ADF.
– Place the original FACE DOWN from the first page (page 1). For
details, see "To position the original on original glass" on
page 4-13.
– With the top side of the original
positioned to the rear side of the
original glass, the Original
Direction setting is not needed.
In this case, proceed to step 4.
4-62
Basic Copy Operations
bizhub 500/420