Expert Adjustment>3 Finisher Adjustment; To Specify Finisher Adjustment - Konica Minolta BIZHUB 500 User Manual

Utility <Administrator Setting>
16.2.167 Expert Adjustment>3 Finisher Adjustment
Use this function to make the following adjustments for finisher options.
Adjustment menu items may differ depending upon the configuration of the
machine options being installed.

To specify Finisher Adjustment

0 Perform Center Staple Position and Half-Fold Position for the machine
with Finisher FS-510 and Saddle stitcher SD-502 installed.
0 Perform Punch Horizontal Position and Punch Resist Loop Size for the
machine with Finisher FS-510 and Punch unit PU-501 installed, or for the
machine with Finisher FS-511 installed.
0 Follow the steps as 1-2-3-7-8 for making Center Staple Position.
Follow the steps as 1-2-4-7-8 for making Half-Fold Position.
Follow the steps as 1-2-5-7-8 for making Punch Horizontal Position.
Follow the steps as 1-2-6-7-8 for making Punch Resist Loop Size.
1
Follow the procedure on page 16-3 to display the Administrator Setting
Screen.
bizhub 500/420
16
16-69