Konica Minolta BIZHUB 500 User Manual page 650

16
3
Select the default output tray to be used in copy jobs.
– Touch [Copy], then select the desired tray number under Default in
the right side area of the screen.
4
Similarly, touch [Print] and [Reports] to select the desired output tray.
5
Touch [OK] to complete the setting.
– To cancel the change, touch [Cancel].
In either case, the Output Setting Screen will be restored.
6
If further changes are required, touch the desired key.
Note
This setting is available on the condition that the machine is mounted
with the optional Finisher FS-510/FS-511 or Job Separator JS-502.
Note
The Output Tray Setting can be accessed also from the User Setting
Screen if the Administrator Security Level in the Administrator Setting is
set to Level 2.
16-34
Utility <Administrator Setting>
bizhub 500/420