Emptying Hole-Punch Scrap Boxes - Konica Minolta Bizhub 601 User Manual

9
9.3

Emptying hole-punch scrap boxes

If the hole-punch scrap box of the punch kit installed with the finisher becomes full, the message shown
below appears (if the box can be emptied by the user).
Note
The setting for emptying the hole-punch scrap box should be specified by the service representative.
For details, contact the service representative.
The default setting is "Service". If a message appears, immediately contact the service representative.
<Screen when a Punch setting is selected>
9-18
Replacing toner cartridges and staple cartridges and emptying hole-punch scrap box
bizhub 751/601 (Version 2)