Speed Button Bar - Screen Display - Hand Held Products SV Series User Manual

Speed Button Bar – Screen Display
See "Bar Code Analysis Screen" on page
access to various application modes and features.
All Data Points, Last 64 Data Points
,
mode. In the 'last 64 data points" mode, the Graph Display Area (see
Analysis Screen" on page
processes each bar code. In the "all data points" mode, bar code processing can
continue, but the ScanView display is not updated. The Grade Bar (Color Bar)
is dimmed when in All Data Points mode.
Zoom In
Toggles the Zoom-In mode. First, it switches from Last 64 Data Points
mode (see All Data Points, Last 64 Data Points Section above), to All Data Points
mode (see All Data Points, Last 64 Data Points Section above). To zoom-in, hold
down the left mouse button and drag the mouse-pointer to a desired data point
in the Graph Display Area; Hold down the Ctrl-key when the left mouse button is
released (then release the Ctrl-key.) The plots are stretched to show only half of
the data on each side of the mouse pointer. To zoom further into the data, repeat
this process.
Erase Current Session Data
Erases all of the data in the current session. Also, the data in the
corresponding hard disk files is deleted.
Reflectance Profile
Scan and Display a new Reflectance Profile. (See
Screen" on page
4 - 6
Toggles the "all data points" mode and the 'last 64 data points"
4-9) is updated immediately as the SV scanner/verifier
4-12.) The shortcut key for this function is F3.
4-9. The buttons on this bar give quick
Quick Check® SV Series User's Guide
"Bar Code
"Reflectance Profile