Advanced Menu; Support Menu; About (Menu Item) - Hand Held Products SV Series User Manual

Note: In cases where the SV is scanning stationary bar codes, the "picket fence"
direction must be used.

Advanced Menu

This menu is an extension of the Setup Menu, providing less commonly used, but
useful SV system features.
Toggle Display Updating
This item enables/disables display updates in real time. Disallowing updates is
useful to allow ScanView to keep up with a high throughput application.
Toggle Additional Results
This item enables/disables additional analysis parameters to be displayed on the
Bottom Panel of the Bar Code Analysis Screen. The additional parameters are
intended for debug use only while working with Hand Held Products' Technical
Support.
Download New Firmware
This item is used for updating the firmware revision level in an SV scanner/
verifier.
Port Configuration
This item lets the user configure the SV unit output port activation threshold
settings.
Initialize the Com Port
In the unlikely event that some failure causes the Com Port to lock up, this
feature can be used to unlock the port.

Support Menu

This menu provides special diagnostic displays that are intended to be used only
while working with Hand Held Products' Application Support.

About (Menu Item)

This item lists information about the origin of ScanView, the version number of
this copy (it also queries the SV unit for its firmware version number) and it shows
the copyright warning.
Quick Check® SV Series User's Guide 4 - 5