Set Up Port Forwarding To Local Servers - NETGEAR WNDR4500v2 User Manual

Port triggering does not require that you know the computer's IP address in advance. The
•
IP address is captured automatically.
Port forwarding requires that you specify the computer's IP address during configuration,
•
and the IP address can never change.
Port triggering requires specific outbound traffic to open the inbound ports, and the
•
triggered ports are closed after a period of no activity.
Port forwarding is always active and does not need to be triggered.
•

Set Up Port Forwarding to Local Servers

Using the port forwarding feature, you can allow certain types of incoming traffic to reach
servers on your local network. For example, you might want to make a local web server, FTP
server, or game server visible and available to the Internet.
Use the Port Forwarding screen to configure the router to forward specific incoming protocols
to computers on your local network. In addition to servers for specific applications, you can
also specify a default DMZ server to which all other incoming protocols are forwarded.
Before starting, you need to determine which type of service, application, or game you want
to provide, and the local IP address of the computer that will provide the service. The server
computer has to always have the same IP address.

To set up port forwarding:
To ensure that your server computer always has the same IP address,
Tip:
use the reserved IP address feature of your router.
Select Advanced Setup > Port Forwarding/Port Triggering to display the following
1.
screen:
N900 Wireless Dual Band Gigabit Router WNDR4500v2
Advanced Settings
97