Internet Setup; Internet Setup Screen Fields - NETGEAR WNDR4500v2 User Manual

Internet Setup

The Internet Setup screen is where you view or change ISP information.
From the BAsic Home screen, select Internet. The following screen displays:
1.
The fields that display in the Internet Setup screen depend on whether your Internet
connection requires a login.
Yes. Select the encapsulation method and enter the login name. If you want to
•
change the login time-out, enter a new value in minutes.
No. Enter the account and domain names, only if needed.
•
Enter the settings for the IP address and DNS server. The default settings usually work fine.
2.
If you have problems with your connection, check the ISP settings.
Click Apply to save your settings.
3.
Click Test to test your Internet connection. If the NETGEAR website does not display within
4.
1 minute, see
Chapter 10,

Internet Setup Screen Fields

The following descriptions explain all of the possible fields in the Internet Setup screen. The
fields that display in this screen depend on whether an ISP login is required.
Does Your ISP Require a Login? Answer either yes or no.
These fields display when no login is required:
Account Name (If required). Enter the account name provided by your ISP. This might
•
also be called the host name.
Domain Name (If required). Enter the domain name provided by your ISP.
•
These fields display when your ISP requires a login:
Internet Service Provider Encapsulation. ISP types. The choices are PPPoE, PPTP, or
•
L2TP.
N900 Wireless Dual Band Gigabit Router WNDR4500v2
Troubleshooting.
NETGEAR genie Basic Settings
21
Scroll to
view more
settings