IPv6
You can use this feature to set up an IPv6 Internet connection type if NETGEAR genie does
not detect it automatically.
To set up an IPv6 Internet connection type:
Select Advanced > Advanced Setup > IPv6 to display the following screen:
1.
Select the IPv6 connection type from the list. Your Internet service provider (ISP) can provide
2.
this information.
If your ISP did not provide details, you can select IPv6 Tunnel.
•
If you are not sure, select Auto Detect so that the router detects the IPv6 type that is
•
in use.
If your Internet connection does not use PPPoE, DHCP, or fixed, but is IPv6, then
•
select IPv6 auto config.
Click Apply so that your changes take effect.
3.
N900 Wireless Dual Band Gigabit Router WNDR4500v2
Advanced Settings
108